Vivotek FD8136-F2 User Manual download pdf (Page 103)

VIVOTEK

User's Manual - 103

Applications > Digital Input

Connect a DI device to the camera's push-in type terminal block, the camera will automatically

detect the current connection state as pulled-high or pulled-low� You may then define the

triggering condition�

Normal status: Select High or Low to define the "Normal status" for the digital input. The

Network Camera will report the current status below�

Applications > Tampering detection

This section explains how to set up camera tamper detection� With tamper detection, the

camera is capable of detecting incidents such as redirection, blocking or defocusing, or even

spray paint�

Please follow the steps below to set up the camera tamper detection function:

1� Check Enable camera tampering detection�

2. Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only

when the tampering factor (the difference between current frame and pre-saved background)

exceeds the trigger threshold�

3� You can configure Tampering Detection as a trigger element to the proactive event

configurations in Event -> Event settings -> Trigger. For example, when the camera is

tampered with, camera can be configured to send pre- and post-event video clips to a

networked storage device� Please refer to page 105 for detailed information�

Advanced Mode

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 200 201

No comments

Vivotek FD8136-F2 User Manual Page 103