Vivotek FD8136-F2 User Manual download pdf (Page 43)

VIVOTEK

User's Manual - 43

Media > Image

Advanced Mode

This section explains how to configure the image settings of the Network Camera� It is

composed of the following four columns: General settings, Picture settings, Exposure, and

Privacy mask�

General settings

Video title: Enter a name that will be displayed on the title bar of the live video as the picture shown

below�

Show timestamp and video title in videos and snapshots: Select this checkbox if you prefer video

title and time stamp to display in videos and snapshots�

A zoom indicator will be displayed on the Home page when you zoom in/out the live viewing

window as the picture shown below. You may zoom in/out the image by scrolling the mouse

wheel inside the live viewing window, and the maximum zoom in will be up to 4 times.

Video Title

Title and Time

Video 17:08:56 2010/11/25

2012/03/09 17:08:56

X1.1

Zoom Factor

Color: Select to display color or black/white video streams.

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate

image flickering associated with fluorescent lights� Note that after the power line frequency is

changed, you must disconnect and reconnect the power cord of the Network Camera in order for

the new setting to take effect�

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect

the display of the live video� Select both options if the Network Camera is installed upside-down

(e.g., on the ceiling) to correct the image orientation. Please note that if you have congured preset

locations, those locations will be cleared after ip/mirror setting.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 200 201

No comments

Vivotek FD8136-F2 User Manual Page 43