Vivotek FD8371EV User Manual download pdf (Page 71)

VIVOTEK

User's Manual - 71

Primary DNS: The primary domain name server that translates hostnames into IP addresses.

Secondary DNS: Secondary domain name server that backups the Primary DNS.

Primary WINS server: The primary WINS server that maintains the database of computer names

and IP addresses.

Secondary WINS server: The secondary WINS server that maintains the database of computer

names and IP addresses.

Enable UPnP presentation: Select this option to enable UPnP

presentation for your Network

Camera so that whenever a Network Camera is presented to the LAN, the shortcuts to connected

Network Cameras will be listed in My Network Places. You can click the shortcut to link to the web

browser. Currently, UPnP

is supported by Windows XP or later. Note that to utilize this feature,

please make sure the UPnP

component is installed on your computer.

Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option

to allow the Network Camera to open ports automatically on the router so that video streams can

be sent out from a LAN. To utilize of this feature, make sure that your router supports UPnP

and

it is activated.

PPPoE (Point-to-point over Ethernet)

Select this option to congure your Network Camera to make it accessible from anywhere as long

as there is an Internet connection. Note that to utilize this feature, it requires an account provided

by your ISP.

Follow the steps below to acquire your Network Camera’s public IP address.

1. Set up the Network Camera on the LAN.

2. Go to Conguration > Event > Event settings > Add server (please refer to Add server on page

107) to add a new email or FTP server.

3. Go to Conguration > Event > Event settings > Add media (please refer to Add media on page

112).

Select System log so that you will receive the system log in TXT

le format which contains the

Network Camera’s public IP address in your email or on the FTP server.

4. Go to Conguration > Network > General settings > Network type. Select PPPoE and enter the

user name and password provided by your ISP. Click Save to enable the setting.

5. The Network Camera will reboot.

6. Disconnect the power to the Network Camera; remove it from the LAN environment.

Mega-pixel Network Camera (192.168.5.151)

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 210 211

No comments

Vivotek FD8371EV User Manual Page 71