Vivotek IP32133 User Manual download pdf (Page 42)

- 41 -

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

users must type in the web browser “http://192.168.0.100:8080” instead of

“http://192.168.0.100”.

Streaming

“Control channel port”, it can be other than default port 5001 to cooperate with the

port opened by the firewall.

“Audio channel port”, it can be other than default port 5002 to cooperate with the

port opened by the firewall.

“Video channel port”, it can be other than default port 5003 to cooperate with the

port opened by the firewall.

“Improve audio quality in low bandwidth environment”, if Network Camera

works in versatile or low network bandwidth environment, users can check this option

to improving audio quality by sacrificing some real-time synchronization.

WLAN Configuration

“SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access

Points and wireless clients attempting to connect to a specific WLAN (Wireless Local

Area Network) must use the same SSID. The default setting is default. Note: The

maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, >

and space character.

“Wireless mode”, clicking on the pull-down menu to select from the following

options:

“Infrastructure” – connecting the WLAN via an Access Point. (The default setting)

“Ad-Hoc” – connecting directly to a host equipped with a wireless adapter in a

peer-to-peer environment.

“Channel”, while in infrastructure mode, the channel is selected automatically to

match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel

must be manually set to the same channel for each wireless adapter. The default

channel setting depends on the installed region.

“TX rate”, to select the maximum transmission rate on the network. 22Mbps is the

default setting.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 70 71

No comments

Vivotek IP32133 User Manual Page 42