Vivotek IP7251 Specifications download pdf (Page 38)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

38 - User's Manual

CCD Settings

Click CCD settings to open the CCD Settings page. In this page, you can set the exposure level, enable

AGC, enable BLC functions. night mode, and IR cut lter.

Exposure level:

You can manually set up the Exposure level, which ranges from 1 to 8. The default value is 4.

Enable AGC (Auto Gain Control):

You can manually set up the AGC level (MAX or Normal).

Enable BLC (Back Light Compensation)

Enable it when the object is too dark or too bright to recognize. It allows the camera to adjust to the best

light conditions in any environment and automatically give the necessary light compensation�

Switch to B/W in night mode:

Select it to enable the Network Camera to automatically switch to B/W in night mode�

IR cut lter:

With a removable IR-cut lter and built-in IR illuminators, up to 15m, this Network Camera can automatically

remove the lter and turn on the IR illuminators during the nighttime to accept IR illumination for low light

sensitivity�

■ Auto

The Network Camera automatically

removes the lter

by judging the level of ambient light�

■ Schedule mode

The Network Camera switches between day mode and night mode based on specified schedule�

Enter the starting time and ending time for the day mode� Note that the time format is [hh:mm] and is

expressed in 24-hour clock time. By default, the starting time and ending time of day mode are set to

07:00 and 18:00�

■ Day mode

In day mode, the Network Camera switches on the IR cut lter at all times to block the infrared light

from reaching the sensor so that the colors will not be distorted�

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 108 109

No comments

Vivotek IP7251 Specifications Page 38