Vivotek MD7530 Specifications download pdf (Page 65)

VIVOTEK

User's Manual - 65

A green bar indicates that even though motions have been detected, the event has not been triggered

because the image variations still fall under the dened threshold.

This motion detection window will also be displayed on the Event Settings page� You can go to

Application > Event Settings > Trigger to choose it as a trigger source� Please refer to page 76 for

detailed information�

NOTE

► How does motion detection work?

There are two motion detection parameters: Sensitivity and Percentage� In the illustration above,

frame A and frame B are two sequential images. Pixel differences between the two frames are

detected and highlighted in gray (frame C) and will be compared with the sensitivity setting� Sensitivity

is a value that expresses the sensitivity to moving objects. Higher sensitivity settings are expected to

detect slight movements while smaller sensitivity settings will neglect them� When the sensitivity is set

to 70%, the Network Camera denes the pixels in the purple areas as “alerted pixels” (frame D).

Percentage is a value that expresses the proportion of “alerted pixels” to all pixels in the motion

detection window. In this case, 50% of pixels are identied as “alerted pixels”. When the percentage is

set to 30%, the motions are judged to exceed the dened threshold; therefore, the motion window will

be outlined in red�

For applications that require a high level of security management, it is suggested to use higher

sensitivity settings and smaller percentage values�

Percentage = 30%

B D

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 156 157

No comments

Vivotek MD7530 Specifications Page 65