- 64 -
www.vivotek.com
Appendix
A. Troubleshooting
Status LED
The following table lists the LED patterns in general.
Condition LED color
Loading system after power on Blink green twice and steady red
During booting procedure Steady green and red
After network is setup (system up) Blink green every second and steady red
During the upgrade firmware process
Fast blink green and blink green every
second
Reset and restore
There is a button in the front of the Video Server. It is used to reset the system or
restore the factory default settings. Sometimes resetting the system sets the system
back to normal state. If the system problems remain after reset, restore the factory
settings and install again.
RESET: Click on the “RESET” button once will reboot the system and the software
installation may be necessary if the IP address is not fixed. This procedure is the same
as removing the power and attaching it again.
RESTORE:
Comments to this Manuals