Vivotek VS7100 Installation Guide download pdf (Page 8)

- 7 -

www.vivotek.com

Installation

In this manual, "User" refers to whoever has access to the Video Server, and

"Administrator" refers to the person who can configure the Video Server and grant user

access to the camera.

Hardware installation

Please verify that your product package contains all the

accessories listed in the foregoing Package Contents.

Depending on the user’s application, an Ethernet cable

may be needed. The Ethernet cable should meet the

specs of UTP Category 5 and not exceed 100 meters in

length.

If you would like to fix the Video Server on the rack, the

screw type M3*5mm is suggested to use for fix.

Upon powering up, the green LED will blink twice and then the red LED will be steady

lighted. While executing startup scripts, both the LEDs will be lighted. After setting up

network, the LED will blink green every second and the red-color is always on.

The Video Server will first detect Ethernet. Operating in ether network mode, the LED will

blink green-color as heartbeat to indicate alive.

Connect the power adapter jack to the Video Server

before plugging in to the power socket. This will reduce

the risk of accidental electric shock.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 114 115

No comments

Vivotek VS7100 Installation Guide Page 8