Vivotek PZ7121 User Manual download pdf (Page 40)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

40 - User's Manual

Wireless LAN (PZ7112/PZ7122 only)

SSID (Service Set Identier): It is a name that identies a wireless network. Access Points and wireless

clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same

SSID� The default setting is default� Note: The maximum length of SSID is 32 single-byte characters and

SSID can’t be any of “, <, > and space character�

Wireless mode: Clicking on the pull-down menu to select from the following options:

Infrastructure: Make the Network Camera connect to the WLAN via an Access Point� (The default setting)

Ad-Hoc: Make the Network Camera connect directly to a host equipped with a wireless adapter in a peer-

to-peer environment�

Channel: While in infrastructure mode, the channel is selected automatically to match the channel setting

for the selected Access Point� In Ad-Hoc mode, the channel must be manually set to the same channel

for each wireless adapter� The default channel setting depends on the installed region�

TX rate: This eld is for selecting the maximum transmission rate on the network. The default setting

is “auto”, that is the Network Camera will try to connect to the other wireless device with highest

transmitting rate�

Security: Select the data encrypt method� There are four types including none, WEP, WPA-PSK, and

WPA2-PSK�

1�

None: No data encryption�

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 117 118

No comments

Vivotek PZ7121 User Manual Page 40