Vivotek 9520 User Manual download pdf (Page 17)

- 17 -

Network settings

Any changes made on the Network type section will restart the system in order to

validate the changes. Make sure every field is entered correctly before clicking

Network type

LAN & PPPoE: The default type is LAN. Select PPPoE if using ADSL.

Get IP address automatically & Use fixed IP address: The default status is “Get

IP address automatically.” It can be tedious having to perform software

installation whenever the Network Camera starts. Therefore, once the network

settings (especially the IP address) have been entered correctly, select “Use fixed

IP address (Default IP address: 169.254.0.99)” and the Network Camera will

skip installation at the next boot. The Network Camera can automatically restart

and operate normally after a power outage. Users can run IP installer to check the

IP address assigned to the Network Camera if the IP address is forgotten or they

may use the UPnP function provided by the Network Camera (MS Windows XP

provides UPnP function at My Network Place).

IP address: This is necessary for network identification.

Subnet mask: This is used to determine if the destination is in the same subnet. The

default value is “255.255.255.0.”

Default router: This is the gateway used to forward frames to destinations in a

different subnet. An invalid router setting will fail the transmission to destinations

in different subnets.

Primary DNS: The primary domain name server that translates hostnames into IP

addresses.

Secondary DNS: Secondary domain name server that backups the Primary DNS.

Primary WINS server: The primary WINS server that maintains the database of

computer name and IP address.

Secondary WINS server: The secondary WINS server that maintains the database of

computer name and IP address.

Enable UPnP presentation: Enable the UPnP camera short cut.

Enable UPnP port forwarding: Enable UPnP port forwarding.

PPPoE: If using the PPPoE interface, fill the following settings from ISP.

User name: The login name of PPPoE account.

Password: The password of PPPoE account.

Confirm password: Input password again for confirmation.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

No comments

Vivotek 9520 User Manual Page 17