Vivotek FD8134 Installation Guide download pdf (Page 6)

EN - 5

English

1. Attach the alignment sticker to the ceilling/wall.

2. Through the two circles on the sticker, drill two pilot holes into the

ceilling/wall.

3. The Network Camera can be mounted with the cable routed

through the ceiling/wall or from the side. If you want to feed the

cable through the ceiling/wall, drill a cable hole A as shown in the

above picture.

4. Hammer the supplied plastic anchors into the holes.

5. Align the two holes on each side of the camera base with the two

plastic anchors on the ceilling/wall, insert the supplied screws to

corresponding holes and secure them with a screwdriver.

Wall Mount

Ceiling Mount

With idiot-proof mechanism design and very compact size, this Network Camera is very

easy for user to install in diverse indoor environment.

Tilt Adjustment Screw

Then remove the black cover as shown below.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Vivotek FD8134 Installation Guide Page 6