Vivotek FD8154 User Manual download pdf (Page 43)

VIVOTEK

User's Manual - 43

System>Maintenance

This chapter explains how to restore the Network Camera to factory default, upgrade rmware

version, etc.

Generalsettings>Upgradermware

This feature allows you to upgrade the firmware of your Network Camera. It takes a few minutes to

complete the process.

Note:DonotpowerofftheNetworkCameraduringtheupgrade!

Follow the steps below to upgrade the rmware:

1. Download the latest rmware le from the VIVOTEK website. The le is in .pkg le format.

2. Click Browse… and locate the rmware le.

3. Click Upgrade. The Network Camera starts to upgrade and will reboot automatically when the upgrade

completes.

If the upgrade is successful, you will see “Reboot system now!! This connection will close”. After that, re-

access the Network Camera.

The following message is displayed when the upgrade has succeeded.

The following message is displayed when you have selected an incorrect rmware le.

Generalsettings>Reboot

This feature allows you to reboot the Network Camera, which takes about one minute to complete. When

completed, the live video page will be displayed in your browser. The following message will be displayed

during the reboot process.

If the connection fails after rebooting, manually enter the IP address of the Network Camera in the

address eld to resume the connection.

Starting firmware upgrade...

Do not power down the server during the upgrade.

The server will restart automatically after the upgrade is

completed.

This will take about 1 - 5 minutes.

Wrong PKG file format

Unpack fail

Reboot system now!!

This connection will close.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 212 213

No comments

Vivotek FD8154 User Manual Page 43