Vivotek IP7161 Installation Guide download pdf (Page 6)

English

For further setup, please refer to the lens’ instruction manual inside the

lens package.

1. Mount the lens by turning it clockwise onto the camera mount until it stops. If

necessary, turn the lens counterclockwise slowly until it gets the best attitude.

2. Connect the lens cable plug to the camera connector.

Mounting the Lens to the Camera

General Connection (without PoE)

1. If you have external devices such as sensors and alarms, connect them to the

general I/O terminal block.

2. Connect the camera to a switch via Ethernet cable.

3. Connect the power cable from the Network Camera to a power outlet.

POWER

COLLISION

LINK

RECEIVE

PARTITION

Network Deployment

Ethernet Switch

1: Power +12V

2: Digital output

3: Digital input

4: Ground

5: AC 24V

6: AC 24V

7: RS485+

8: RS485-

1 2 3 4 5 6 7 8 9 10 11

No comments

Vivotek IP7161 Installation Guide Page 6