Vivotek IP8130 User Manual download pdf (Page 61)

VIVOTEK

User's Manual - 61

PPPoE (Point-to-point over Ethernet)

Select this option to congure your Network Camera to make it accessible from anywhere as long

as there is an Internet connection� Note that to utilize this feature, it requires an account provided

by your ISP�

Follow the steps below to acquire your Network Camera’s public IP address�

1� Set up the Network Camera on the LAN�

2. Go to Conguration > Event > Event settings > Add server (please refer to Add server on page

102) to add a new email or FTP server�

3. Go to Conguration > Event > Event settings > Add media (please refer to Add media on page

101)�

Select System log so that you will receive the system log in TXT le format which contains the

Network Camera’s public IP address in your email or on the FTP server�

4. Go to Conguration > Network > General settings > Network type. Select PPPoE and enter the

user name and password provided by your ISP� Click Save to enable the setting�

5� The Network Camera will reboot�

6� Disconnect the power to the Network Camera; remove it from the LAN environment�

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 195 196

No comments

Vivotek IP8130 User Manual Page 61