Vivotek IP8151P Specifications download pdf (Page 96)

VIVOTEK

96 - User's Manual

If successful, you will receive a test.txt le on the network storage server.

3� Enter a server name�

4� Click Save to complete the settings and click Close to exit the page.

Recording Settings

Click Add to open the recording setting page� On this page, you can define the adaptive recording,

recording source, recording schedule, and recording capacity� A total of 2 recording settings can be

congured.

Recording name: Enter a name for the recording setting�

Enable this recording: Select this option to enable video recording�

With adaptive recording: Select this option will activate the frame rate control according to alarm trigger�

The frame control means that when there is alarm trigger, the frame rate will raise up to the value you’ve

set on Video Quality Settings page� Please refer to page 63 for more information�

If you enable adaptive recording and enable time-shift cache stream on Camera A, only when an event

is triggered on Camera A will the server record the full frame rate streaming data; otherwise, it will only

request the I frame data during normal monitoring, thus effectively save lots of bandwidths and storage�

Time

Bandwidth

Activity Adaptive Streaming

for Dynamic Frame Rate Control

I frame ---> Full frame rate ---> I frame

Continuous recording

NOTE

► To enable adaptive recording, please make sure

you’ve set up the trigger source such as Motion

Detection, DI Device, or Manual Trigger�

► When there is no alarm trigger:

- JEPE mode: record 1 frame per second�

- H�264 mode: record I frame only�

- MPEG-4 mode: record I frame only�

► When the I frame period is >1s on Video settings

page, it should force to make the I frame period to

1s when adaptive recording is activated�

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 178 179

No comments

Vivotek IP8151P Specifications Page 96