Vivotek MD8531H User Manual download pdf (Page 12)

VIVOTEK

12 - User's Manual

Then, follow the steps below to install the camera to either a ceiling or wall:

1. Attach the supplied alignment sticker to the ceiling/wall.

2. Using the 4 screw circles on the sticker, drill 4 pilot holes into the ceiling/wall. Then ham-

mer the plastic anchors into the holes if necessary.

3. This Network Camera can be mounted with the cable routed through the ceiling/wall or

from the side. If you want to feed the cable through the ceiling/wall, drill a cable hole A

as shown in the picture. If the cable goes through the rear opening of the dome cover,

please remove the plastic cover (B).

4. Through the 4 holes on the camera base, insert the screws to corresponding holes and

secure the camera base with a screwdriver.

3.3 Ceiling Mount

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 206 207

No comments

Vivotek MD8531H User Manual Page 12