Vivotek SD83xxE/-M Installation Guide download pdf (Page 7)

EN-6

3. Connect cables and use sealants and putties to make sure cable joints and the

cabling hole are waterproof.

4. Secure the included ground wire to the dome cap, pass it through the mount brack-

et, and connect the other end to a grounded conduit later.

5. Use the included hex wrench to secure the top section.

3-3. Mounting the Camera

HD WDR Pro

Alignment Mark

C Mark

1. Align the camera body with the top section. Align the alignment mark on the camera

with that on the interface section. Push the camera up to match the top section.

2. Rotate the camera clockwise until its alignment mark is aligned with the "C" mark.

3. Use the included T25 stardriver to tighten the 3 anti-tamper screws from the top.

Make sure all parts have been securely tightened.

1 2 3 4 5 6 7 8 9 10 11

No comments

Vivotek SD83xxE/-M Installation Guide Page 7