Vivotek VC8201 User Manual download pdf (Page 113)

VIVOTEK

User's Manual - 113

Applications > Motion detection

This section explains how to congure the Network Camera to enable motion detection. A total

of ve motion detection windows can be congured.

Follow the steps below to enable motion detection:

1. Click New to add a new motion detection window.

2. In the Window Name text box, enter a name for the motion detection window.

■ Use four mouse clicks to dene the area where Motion Detection will take effect.

■ To change the four points of the rectangular, place your mouse cursor on any of it until it turns into a

four-direction mark

3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the

Sensitivity and Percentage slide bar.

4. Click Save to enable the settings.

5. Select Enable motion detection to enable this function.

For example:

The Percentage Indicator will rise or fall depending on the variation between sequential images. When

motions are detected by the Network Camera and are considered to have exceeded the defined

threshold, the red bar rises. Meanwhile, the motion detection window will be outlined in red. Photos or

videos can be captured instantly and congured to be sent to a remote server (Email, FTP) using this

feature as a trigger source. For more information on how to set an event, please refer to Event settings

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 202 203

No comments

Vivotek VC8201 User Manual Page 113