Vivotek WDR Pro User Manual download pdf (Page 23)

VIVOTEK

User's Manual - 23

Using 3GPP-compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network

Camera can be accessed over the Internet. For more information on how to set up the Network

Camera over the Internet, please refer to Setup the Network Camera over the Internet on page

15.

To utilize this feature, please check the following settings on your Network Camera:

1. Because most players on 3GPP mobile phones do not support RTSP authentication, make

sure the authentication mode of RTSP streaming is set to disable.

For more information, please refer to RTSP Streaming on page 68.

2. As the the bandwidth on 3G networks is limited, you will not be able to use a large video size.

Please set the video and audio streaming parameters as listed below.

For more information, please refer to Stream settings on page 54.

Video Mode H.264

Frame size 176 x 144

Maximum frame rate 5 fps

Intra frame period 1S

Video quality (Constant bit rate) 40kbps

3. As most ISPs and players only allow RTSP streaming through port number 554, please set

the RTSP port to 554. For more information, please refer to RTSP Streaming on page 68.

4. Launch the player on the 3GPP-compatible mobile devices (e.g., Quick Time).

5. Type the following URL commands into the player.

The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming

access name for stream # with small frame size and frame rate>.

For example:

You can configure Stream #3 into the suggested stream settings as listed above for live

viewing on a mobile device.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 208 209

No comments

Vivotek WDR Pro User Manual Page 23