Vivotek IP8152 User Manual download pdf (Page 44)

VIVOTEK

44 - User's Manual

Media > Image

Advanced Mode



This section explains how to configure the image settings of the Network Camera. It is

composed of the following four columns: General settings, Image settings, Exposure, and

Privacy mask.

General settings

Video title: Enter a name that will be displayed on the title bar of the live video as the picture shown

below.

Show timestamp and video title in videos and snapshots: Select this checkbox if you prefer video

title and time stamp to display in videos and snapshots.

A zoom indicator will be displayed on the Home page when you zoom in/out on the live viewing

window as shown below. You may zoom in/out on the image by scrolling the mouse wheel inside

the live viewing window, and the maximum zoom in will be up to 12 times.

Video Title

Title and Time

Video 17:08:56 2012/06/09

2012/06/09 17:08:56

X2.1

Zoom Factor

Zoom In

Zoom Out

Color: Select to display color or black/white video streams.

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate

image flickering associated with fluorescent lights. Note that after the power line frequency is

changed, you must disconnect and reconnect the power cord of the Network Camera in order for

the new setting to take effect.

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect

the display of the live video. Select both options if the Network Camera is installed upside-down

(e.g., on the ceiling) to correct the image orientation. Please note that if you have congured preset

locations, those locations will be cleared after ip/mirror setting.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 211 212

No comments

Vivotek IP8152 User Manual Page 44