Vivotek IP8152 User Manual download pdf (Page 62)

VIVOTEK

62 - User's Manual

PPPoE (Point-to-point over Ethernet)

Select this option to congure your Network Camera to make it accessible from anywhere as long

as there is an Internet connection. Note that to utilize this feature, it requires an account provided

by your ISP.

Follow the steps below to acquire your Network Camera’s public IP address.

1. Set up the Network Camera on the LAN.

2. Go to Conguration > Event > Event settings > Add server (please refer to Add server on page

104) to add a new email or FTP server.

3. Go to Conguration > Event > Event settings > Add media (please refer to Add media on page

109).

Select System log so that you will receive the system log in TXT le format which contains the

Network Camera’s public IP address in your email or on the FTP server.

4. Go to Conguration > Network > General settings > Network type. Select PPPoE and enter the

user name and password provided by your ISP. Click Save to enable the setting.

5. The Network Camera will reboot.

6. Disconnect the power to the Network Camera; remove it from the LAN environment.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 211 212

No comments

Vivotek IP8152 User Manual Page 62