Vivotek AE-201 Installation Guide download pdf (Page 17)

English

Below is a general, sample procedure using a gooseneck bracket:

1. Route power lines and other cables through the wall and the bracket.

2. Locate the position where you want to install the gooseneck bracket and camera. Drill

holes on the wall for securing the bracket and for routing the cables.

Secure the bracket by hammering anchors into the wall and then fasten hex nuts and

washers on them.

3. Attach the outdoor enclosure to the bracket by rotating it clockwise until it is tightly

fastened.

4. Use a hex wrench to secure the mounting adapter to the gooseneck bracket.

When cabling is done, proceed with initial setup such as enabling network access, focus

tuning, or zooming. When done, secure the outer dome cover.

Cables

AM-221

Gooseneck

bracket

IMPORTANT:

3-3. Gooseneck Installation

The screws and mounting surface must be able

to support a weight of 6 kg.

The same installation method applies to the

AM-212 wall-mount bracket.

IP8152_housing_ig_VVTK_v1.0_20121206.indd 17 2013/1/10 下午 01:36:48

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

No comments

Vivotek AE-201 Installation Guide Page 17