EN - 10
Based on the live image retrieved from the camera, adjust the camera lens by doing the
following:
DO NOT over rotate the lens. Doing
so will damage the camera lens
module
To adjust the viewing angle
1. Loosen the pan adjustment screw and then turn the lens module left and right. Upon
completion, tighten the screw.
2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Loosen the rotation adjustment screw and then turn the lens to adjust the image
orientation. Upon completion, tighten screw.
Rotate the screw
Turn the lens
Adjusting the Lens
7
The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation
for either ceiling or wall mount.
3-axis Mechanism Design
Loosen Tighten
Loosen
Tighten
Loosen
Tighten
Pan 350°
Rotate 350°
Pan 350°
Rotate 350°
Tilt 85°
Pan Adjustment Screw
Tilt Adjustment Screw
Rotation Adjustment Screw
Tilt 85°
Comments to this Manuals