Vivotek FE8181 User Manual download pdf (Page 128)

VIVOTEK

128 - User's Manual

Applications > DI and DO

Digital input: Select High or Low as the Normal status for the digital input. Connect the digital input pin of

the Network Camera to an external device to detect the current connection status.

Digital output: Select Grounded or Open to dene the normal status for the digital output. Connect the

digital output pin of the Network Camera to an external device to determine the current status.

Set up the event source as DI on Event > Event settings > Trigger. Please refer to page 114 for

detailed information.

Applications > Tampering detection

This section explains how to set up camera tamper detection. With tamper detection, the

camera is capable of detecting incidents such as redirection, blocking or defocusing, or even

spray paint.

Please follow the steps below to set up the camera tamper detection function:

1. Check Enable camera tampering detection.

2. Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only when the

tampering factor (the difference between current frame and pre-saved background) exceeds the

trigger threshold.

3. Set up the event source as Camera Tampering Detection on Event > Event settings > Trigger.

Please refer to page 114 for detailed information.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 239 240

No comments

Vivotek FE8181 User Manual Page 128