Vivotek IP3132 Specifications download pdf (Page 11)

- 10 -

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

First access to Network Camera

Check network settings even if connected already

Although Network Camera already can be connected after software installation from

Local Area Network, administrators should complete the network settings in the

configuration page including the correct subnet mask and IP address of gateway and

DNS. Ask for the network administrator or Internet service provider for the detail

information. By default Network Camera will need administrator's installation every

time it reboots. If the network settings are sure to work all the time, disable the install

option. Refer to “Network settings” in system configuration page for details. Once any

setting is entered incorrectly and thus hangs Network Camera, restore the factory

settings according to the steps in troubleshooting.

Add password to protect from offense from strangers

Since the administrator’s password is blank by default, Network Camera will not ask for

any password. However the administrator should change the password as soon as

possible to protect from network intruders. Once the administrator’s password is saved,

Network Camera always needs user name and password before access. The

administrator can setup at most twenty user accounts. Each user is able to access

Network Camera except for system configuration. Some critical functions are limited

only for administrators such as system configuration, user administration and software

upgrade. The user name of the administrator is assigned to “root” permanently. Once

the password is changed, the browser will display an authentication window to ask for

the new password. There is no way to discover administrator’s password. If the

password is forgotten, only restoring factory defaults can help.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 62 63

No comments

Vivotek IP3132 Specifications Page 11