Vivotek Network Camera IP7133/IP7134 User Manual download pdf (Page 7)

EN - 6

For further setup, please refer to the user's manual on the software CD.

Conﬁ gure the Wireless Connection

(IP7134 only)

1. Check the SSID for your wireless access point (AP).

2. Go to the IP7134 Conﬁ guration page > Wireless LAN.

3. Type in the SSID the same as your AP.

4. Select the Wireless mode as "Infrastructure".

5. Click Save. The Network Camera will reboot.

POWER

COLLISION

LINK

RECEIVE

PARTITIO

ADSL/Cable/Hub

6. Wait for the live image to be reloaded to your browser. Then, unplug the power cable and

Ethernet cable from the Network Camera.

7. Replug the power cable to the camera. The Network Camera will now operate in wireless

mode.

Note:

1. SSID, abbreviated from Service Set Identiﬁ er, is the name assigned to the wireless

network. The IP7134 factory SSID setting is set to "default".

2. Select "Ad-Hoc" wireless mode if you want the IP7134 to communicate without using an

AP or wireless router.

1 2 3 4 5 6 7 8

No comments

Vivotek Network Camera IP7133/IP7134 User Manual Page 7