Vivotek VS2402 Specifications download pdf (Page 14)

- 11 -

Installation

To easily fit into various environments, the Video Server automatically detects the

attached interfaces and configures itself to the best condition. Therefore users need not

care whether the connected cameras are either NTSC or PAL, how to select the network

between Ethernet and modem, and whether the Ethernet speed is 10Mbps or 100 Mbps.

If the connected motorized camera is on the support list, users only need to plug and

play without complicated configurations.

The Video Server supports Ethernet and modem interfaces according to the user's

existing network. Ethernet can provide higher bandwidth to achieve the best

performance while dial-up network with modem is more common in current Internet

applications. Refer to the related installation section for your network environment. If

both interfaces are available, Ethernet is recommended and will be chosen as the first

priority if Ethernet cable and modem are concurrently attached. Managing to install in

the other interface will automatically clear the previous network settings to start new

installation.

In the following content, "user" refers to those who can access the Video Server and

"Administrator" refers to the supervisor who has the root password to configure the

Video Server in addition to general access. Administrator should carefully read this

manual, especially during installation.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 95 96

No comments

Vivotek VS2402 Specifications Page 14