Vivotek VS7100 Installation Guide download pdf (Page 66)

- 65 -

www.vivotek.com

Restoring the factory defaults

will erase any previous settings.

1. Press on the button firmly.

2. Wait for self-diagnostic to run.

3. Free the button fast blink green and red.

B. URL commands of the Video Server

Overview

For some customers who already have their own web site or web control application, a Network

Camera/Video server can be easily integrated through URLs. This document provides the supersets of URL

commands V2 for VIVOTEK 7000 series products.

This section specifies the external HTTP-based application programming interface. The HTTP-based

camera interface provides the functionality to request a single image, to control camera functions (PTZ,

output relay etc.), and to get and set internal parameter values. The image and CGI-requests are handled

by the built-in Web server.

Style Convention

In URL syntax and in descriptions of CGI parameters, a text within angle brackets denotes a content that

is to be replaced with either a value or a string. When replacing the text string, the angle brackets shall

also be replaced. An example of this is the description of the name for the server, denoted with

<servername> in the URL syntax description below, which is replaced with the string myserver in the URL

syntax example, also below.

URL syntax is written with the word “Syntax:" written in bold face followed by a box with the reference

syntax as seen below. The name of the server is written as <servername>. This is intended to be replaced

with the name of the actual server. This can either be a name, e.g., "mywebcam" or "thecam.adomain.net"

or the associated IP number for the server, e.g., 192.168.0.220.

Special notes will be marked in RED.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 114 115

No comments

Vivotek VS7100 Installation Guide Page 66