- 8 -
www.vivotek.com
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet
cable plug in the power adapter. If the LED turns out to blink green-color, go to next
paragraph “Software installation”.
This Video Server provides a general I/O terminal block with one digital input and one
digital output device control. The pin definition is as below.
Pin Name
Specification
Remarks
1 Power 12VDC ± 5%, max. 1.5A Max. rating 2A
2 Ground
3 Digital input OPEN/Short-to-GND, isolation 2kV Internal pull-up
4 Digital output
Max. 40VDC, max. 400mA, isolation 2kV
5 RS485_A 100Ω termination
6 RS485_B 100Ω termination
Comments to this Manuals