Vivotek IP8152 User Manual download pdf (Page 45)

VIVOTEK

User's Manual - 45

Day/Night Settings

Switch to B/W in night mode

Select this to enable the Network Camera to automatically switch to Black/White display during

night mode.

IR cut lter

With a removable IR-cut lter, this Network Camera can automatically remove the lter to let IR

light into the sensor during low light conditions.

■ Auto mode

The Network Camera automatically removes the lter by judging the level of ambient light.

■ Day mode

In day mode, the Network Camera switches on the IR cut lter at all times to block infrared light

from reaching the sensor so that the colors will not be distorted.

■ Night mode

In night mode, the Network Camera switches off the IR cut lter at all times for the sensor to

accept infrared light, thus helping to improve low light sensitivity.

■ Synchronize with digital input

The Network Camera automatically removes the IR cut lter when DI is triggered. Some external

housing may come with its light sensor and IR lights, and has a pin signal to tell the camera to

switch off its IR cut lter.

■ Schedule mode

The Network Camera switches between day mode and night mode based on a specified

schedule. Enter the start and end time for day mode. Note that the time format is [hh:mm] and is

expressed in 24-hour clock time. By default, the start and end time of day mode are set to 07:00

and 18:00.

Light sensor sensitivity

Select Low, Normal, or High sensitivity for the light sensor.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 211 212

No comments

Vivotek IP8152 User Manual Page 45