Vivotek WIRELESS PAN/TILT PT7137 User Manual download pdf (Page 35)

- 34 -

www.vivotek.com

WLAN Configuration

“SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access

Points and wireless clients attempting to connect to a specific WLAN (Wireless Local

Area Network) must use the same SSID. The default setting is default. Note: The

maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, >

and space character.

“Wireless mode” Clicking on the pull-down menu to select from the following

options:

▶ “Infrastructure” Make the Network Camera connect to the WLAN via an Access

Point. (The default setting)

▶ “Ad-Hoc” Make the Network Camera connect directly to a host equipped with a

wireless adapter in a peer-to-peer environment.

“Channel” While in infrastructure mode, the channel is selected automatically to

match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel

must be manually set to the same channel for each wireless adapter. The default

channel setting depends on the installed region.

“TX rate” This field is for selecting the maximum transmission rate on the network.

The default setting is “auto”, that is the Network Camera will try to connect to the other

wireless device with highest transmitting rate.

“Security” Select the data encrypt method

▶ “None” – No data encryption.

▶ “WEP” – allows communication only with other devices with identical WEP settings.

▶ “WPA-PSK” – Use WPA pre-shared key.

“Auth Mode” Choosing one of the following modes, (Open is the default setting).

▶ “Open” – communicates the key across the network.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 78 79

No comments

Vivotek WIRELESS PAN/TILT PT7137 User Manual Page 35