Vivotek IP8130 Installation Guide download pdf (Page 8)

EN - 7

English

1. In addition to the use of WPS function, you can also use a wired connection to manually

set up your wireless conguration.

2. Enter the Conguration > Wireless > WLAN page. Key in the same wireless settings

as those on your router/AP (SSID, Encryption type, and Pre-shared key).

Wireless Connection: Manual Conguration

3. When done, click the Save button, disconnect the Ethernet cable and then reboot the

camera (by disconnect and then connect the power cord). The camera should then be

connected over the wireless network. If successfully congured, the camera LED should

turn Green after 1 minute. If the camera LED does not turn Green within 2 minutes,

check your wireless conguration for errors.

1 2 3 4 5 6 7 8 9

No comments

Vivotek IP8130 Installation Guide Page 8