Vivotek VS3102 Installation Guide download pdf (Page 14)

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Installation

To easily fit into various environments, the Video Server automatically detects the attached interfaces and

configures itself to the best condition. Therefore users need not care whether the connected cameras are

either NTSC or PAL, how to select the network between Ethernet and modem, and whether the Ethernet

speed is 10Mbps or 100 Mbps. If the connected motorized camera is on the support list, users only need

to plug and play without complicated configurations.

The Video Server supports Ethernet and modem interfaces according to the user's existing network.

Ethernet can provide higher bandwidth to achieve the best performance while dial-up network with

modem is more common in current Internet applications. Refer to the related installation section for your

network environment. If both interfaces are available, Ethernet is recommended and will be chosen as the

first priority if Ethernet cable and modem are concurrently attached. Managing to install in the other

interface will automatically clear the previous network settings to start new installation.

In the following content, "user" refers to those who can access the Video Server and "Administrator"

refers to the supervisor who has the root password to configure the Video Server in addition to general

access. Administrator should carefully read this manual, especially during installation.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 82 83

No comments

Vivotek VS3102 Installation Guide Page 14