Vivotek VS3102 Installation Guide download pdf (Page 61)

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Advanced functions

Viewing system log

Click the link on the configuration page to view the system log file. The content of the file provides useful

information about configuration and connection after system boot- up.

Viewing system parameters

Click on this link on the configuration page to view the entire system’s parameter set. The content is the

same as those in CONFIG.INI.

Restore factory default settings

Click on this link on the configuration page to restore the factory default settings. Any changes made so

far will be lost and the system will be reset to the initial factory settings. After clicking on the “Restore”

button and make confirmation, the system will restart and require the installer program to set up the

network again.

Clear data path for proprietary commands

The Video Server provides a highly customized control support to third-party serial interface devices

aside from PTZ cameras. That means in addition to setting up a custom camera with PTZF commands,

users may utilize this mode and introduce a customized homepage to transmit arbitrary user-defined

commands from the user-side to the Video Server. The third-party device connected to the serial port of

the Video Server will receive the same command sent by the originator. The user only needs to attach the

command in ASCII format after the special URL. The Video Server will parse the command and transfer

into binary code to send out. See the clear data mode serial port driver in the URL commands of the Video

Server section for detailed description.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 82 83

No comments

Vivotek VS3102 Installation Guide Page 61