Vivotek IP8162 Specifications download pdf (Page 43)

VIVOTEK

User's Manual - 43

Picture settings

On this page, you can tune the White balance, Image adjustment and WDR enhanced �

White balance: Adjust the value for the best color temperature.

■ Auto: It will automatically adjust the color temperature of the light in response to different light

sources�

You may follow the steps below to adjust the white balance to the best color temperature�

1� Set the White balance to Auto�

2� Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the

color temperature automatically�

3� Check Fix current value to conrm the setting while the white balance is being measured.

■ Manual: This item allows user to input the R gain & B gain manually.

Image Adjustment

■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.

■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. Please note that this

function will be disabled if you enable WRD enhancement in the column below�

■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. You can also select

Customize and manually enter a value�

■ Sharpness:

Adjust the image sharpness level, which ranges from -3 to +3�

You can also select

Customize and manually enter a value�

■ Gamma curve: This function is for user to

select a proper gamma curve value to adjust the gray-

scale of the monitor�

Sensor Setting 2:

For special situations

Sensor Setting 1:

For normal situations

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 198 199

No comments

Vivotek IP8162 Specifications Page 43