Vivotek IP8162 Specifications Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 199
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
VIVOTEK
User's Manual - 9
Network Deployment
Setting up the Network Camera over the Internet
This section explains how to congure the Network Camera to an Internet connection
1� If you have external devices such as sensors and alarms, connect them to the general I/O
terminal block�
2� Connect the camera to a switch via Ethernet cable�
3� Connect the power cable from the Network Camera to a power outlet�
NOTE
There are two power supply modes-- feed power from the Network Camera to the external
DO device or feed power to the external Do device from an external power supply� Please
follow the instruction below to connect the external DO device:
1� Feed power by the Network Camera - connect to pin 1 & pin 2
2� Feed power by an external power supply - connect to pin 2 & pin 4
For 5V Network Camera: < 5V, 100mA; for 12V Network Camera: < 12V, 100mA
3� Please note that this camera is for indoor use only
There are several ways to set up the Network Camera over the InternetThe rst way is to set
up the Network Camera behind a routerThe second way is to utilize a static IPThe third way is
to use PPPoE
1
2
3
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
Ethernet Switch
1: Power +12V
2: Digital output
3: Digital input
4: Ground
5: AC 24V
6: AC 24V
7: RS485+
8: RS485-
1: Power +12V
2: Digital output
3: Digital input
4: Ground
1: Power +12V
2: Digital output
3: Digital input
4: Ground
NOTE:
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 198 199

Comments to this Manuals

No comments