Vivotek IP7133/IP7134 User Manual download pdf (Page 30)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

30 - User's Manual

Wireless LAN (IP7134 only)

SSID (Service Set Identiﬁer): It is a name that identiﬁes a wireless network. Access Points and wireless

clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same

SSID. The default setting is default. Note: The maximum length of SSID is 32 single-byte characters and

SSID can’t be any of “, <, > and space character.

Wireless mode: Clicking on the pull-down menu to select from the following options:

Infrastructure: Make the Network Camera connect to the WLAN via an Access Point. (The default setting)

Ad-Hoc: Make the Network Camera connect directly to a host equipped with a wireless adapter in a peer-

to-peer environment.

Channel: While in infrastructure mode, the channel is selected automatically to match the channel setting

for the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel

for each wireless adapter. The default channel setting depends on the installed region.

TX rate: This ﬁeld is for selecting the maximum transmission rate on the network. The default setting

is “auto”, that is the Network Camera will try to connect to the other wireless device with highest

transmitting rate.

Security: Select the data encrypt method. There are four types from low to high: none, WEP, WPA-PSK,

and WPA2-PSK.

None: No data encryption.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 86 87

No comments

Vivotek IP7133/IP7134 User Manual Page 30